Перейти к содержимому

Do I need external I²C pull-up resistors for rbAmp?

30 июля 2026 г. от
Do I need external I²C pull-up resistors for rbAmp?
Administrator

For one module, no — the rbAmp PCB carries built-in 4.7 kΩ pull-ups on SDA/SCL to 3.3 V. With 2 or 3 modules on a bus up to 15 cm, leave the built-in pull-ups on every module — nothing to cut (3 modules measured: 15 cm leads, 50 kHz). From 4 modules, or on a longer bus, disable them on all modules (a solder jumper) and fit one external pair near the master; values are in the multi-module build.

Documentation & source code
📖 rbAmp documentation overview · 💻 rb-amp/rbamp-docs on GitHub
Why is rbAmp 5 V-powered but the I²C bus is 3.3 V?