Solution · RBgrid · available
See your electricity as money
Your bill is priced per tariff zone, and your meter shows one total in kWh. RBgrid shows what every measured circuit costs, on a hub in your panel: no account, no cloud, no subscription.

What it shows
- Cost right now per circuit and for the whole house, in your currency
- Today and month to date, with yesterday for comparison
- Which tariff zone you are in and when the cheaper one starts
- Import and export measured separately, export valued at your own rates
Live demo, sample data.

Examples — and what to buy for each
Five real set-ups. Each opens in the live demo with sample data; the kit lists the parts and prices, the article shows how it is built.

A house that exports
Solar and a car charger: what the export is worth at your sell price. How it is built

A three-phase house with a heat pump and an EV charger
What the heat pump and the charger cost in each tariff zone. How it is built

A three-phase workshop
Which machine runs, what the compressor costs and how close the workshop is to its input limit. How it is built
What you need
The rbAmp modules measure. The hub collects, computes and stores. You see it in the web app or in Home Assistant.
Which modules and how many for the current release: rbgrid.io/hardware.


An ESP32 board with PSRAM
16 MB flash: an ESP32-WROVER, or an ESP32-S3 on the N16R8 module. One you have or one you buy — you flash it once over USB.
Your own tariff, computed on the hub
Time-of-use zones with weekends, per-kWh energy tax, grid fee and levies, and VAT — each entered separately and all included in the costs. Export is valued at a per-zone sell price. Live demo, sample data.

Three ways to use it

I want it to just work
Flash the hub, run the setup wizard, see your first costs.

I run Home Assistant
The hub announces every point over MQTT; Home Assistant creates the sensors.
Latest on the RBgrid blog
Releases
- v1.2.1 What changed since v1.1.7 — the hub follows market prices, keeps the price it used beside the energy, marks cheap windows, and runs on the ESP32-S3.
- v1.1.7 RBgrid v1.1.7 keeps energy and settings through faults that used to lose them, and adds remote metering nodes over ESP-NOW with published firmware.
- v1.1.6 RBgrid v1.1.6 keeps your clock settings through a restart and reads a three-phase input metered per phase as one input across every period view.
Everything else is on rbgrid.io
Guides, releases, the web-app documentation and the source code.
RBgrid's hub and node firmware is source-available under PolyForm Noncommercial 1.0.0 — free for personal and non-commercial use; commercial use: info@rbamp.com. It measures and computes costs; it does not switch loads.





