Ir al contenido

Solution · RBgrid · available

See your electricity as money

Your bill is priced per tariff zone, and your meter shows one total in kWh. RBgrid shows what every measured circuit costs, on a hub in your panel: no account, no cloud, no subscription.

An electricity meter between the grid and solar and wind power, with coins and currency signs: electricity counted as money.

What it shows

  • Cost right now per circuit and for the whole house, in your currency
  • Today and month to date, with yesterday for comparison
  • Which tariff zone you are in and when the cheaper one starts
  • Import and export measured separately, export valued at your own rates

Live demo, sample data.

RBgrid Overview switching between power and money views, sample data.

Examples — and what to buy for each

Five real set-ups. Each opens in the live demo with sample data; the kit lists the parts and prices, the article shows how it is built.

RBgrid Overview of a house exporting solar power, sample data.

A house that exports

Solar and a car charger: what the export is worth at your sell price. How it is built

Kit and parts →
RBgrid Overview of a three-phase house with a heat pump, sample data.

A three-phase house with a heat pump and an EV charger

What the heat pump and the charger cost in each tariff zone. How it is built

Kit and parts →
RBgrid money view of a flat: cost per hour and where today's money goes, sample data.

A flat

The supply, five circuits and a day/night tariff. How it is built

Kit and parts →
RBgrid Overview of a three-phase workshop, sample data.

A three-phase workshop

Which machine runs, what the compressor costs and how close the workshop is to its input limit. How it is built

Kit and parts →
RBgrid Overview of a car park with EV chargers, sample data.

A car park

EV chargers measured against the input's capacity. How it is built

Kit and parts →

What you need

The rbAmp modules measure. The hub collects, computes and stores. You see it in the web app or in Home Assistant.

Which modules and how many for the current release: rbgrid.io/hardware.

rbAmp modules on the circuits feed an ESP32 hub running RBgrid; you see the results in the web app or in Home Assistant.
A generic ESP32-WROVER development board.

An ESP32 board with PSRAM

16 MB flash: an ESP32-WROVER, or an ESP32-S3 on the N16R8 module. One you have or one you buy — you flash it once over USB.

Your own tariff, computed on the hub

Time-of-use zones with weekends, per-kWh energy tax, grid fee and levies, and VAT — each entered separately and all included in the costs. Export is valued at a per-zone sell price. Live demo, sample data.

RBgrid moving from the day zone to the cheaper night zone, sample data.

Three ways to use it

The RBgrid setup wizard, step by step, sample data.

I want it to just work

Flash the hub, run the setup wizard, see your first costs.

RBgrid Home Assistant settings with the MQTT broker form, sample data.

I run Home Assistant

The hub announces every point over MQTT; Home Assistant creates the sensors.

Latest on the RBgrid blog

All posts on rbgrid.io →

Everything else is on rbgrid.io

Guides, releases, the web-app documentation and the source code.

RBgrid's hub and node firmware is source-available under PolyForm Noncommercial 1.0.0 — free for personal and non-commercial use; commercial use: info@rbamp.com. It measures and computes costs; it does not switch loads.