Administrator Local Current-Limit with Arduino — Trip a Relay Before the Breaker, No Cloud The monitors show you the current. This one acts on it : when a circuit stays over your limit, the Arduino trips a relay to shed the load (or sounds an alert) — and it does it in its own loop, no Home... Arduino current-monitoring ESP32 load-control load-shedding Jul 30, 2026
Administrator Load shedding in Home Assistant: current limits, alerts and relays from your own per-circuit data The problem this solves The main breaker trips when the EV charger, the water heater and the workshop all pull at once. Or you want to cap a circuit — a rental outlet, a garage socket — so it can't ex... current-monitoring ESP32 esphome home-assistant load-control load-shedding peak-shaving Jul 29, 2026