Administrator Is the rbAmp module isolated from mains? Yes — there's a galvanic isolation barrier inside between the mains side (voltage sense, CT input) and the low-voltage side (I²C). The module's GND is the host's ground, not mains neutral, so wiring t... faq hardware safety Jul 30, 2026
Administrator Do I need external I²C pull-up resistors for rbAmp? For one module, no — the rbAmp PCB carries built-in 4.7 kΩ pull-ups on SDA/SCL to 3.3 V. With 2 or 3 modules on a bus up to 15 cm, leave the built-in pull-ups on every module — nothing to cut (3 modul... faq hardware I2C Jul 30, 2026
Administrator Why is rbAmp 5 V-powered but the I²C bus is 3.3 V? The module has its own microcontroller doing the measurement, and it needs clean, stable power to keep the ADC readings accurate. So the module takes 5 V on VCC and runs it through an on-board low-noi... faq hardware I2C power Jul 30, 2026