Se rendre au contenu

About rbAmp

Energy-metering modules for makers.

rbAmp makes AC energy-metering modules that you read from your own controller: an ESP32 with ESPHome, your own Arduino or ESP-IDF code, a Raspberry Pi with Python, or — on STD — any Modbus RTU master. Clamp-on CT inputs, an I²C bus with programmable addresses, and data that stays on your network.

Why we built it

Many DIY energy meters talk UART: one meter per port, and energy counters that the host has to manage itself. We wanted modules that share one bus, keep their own energy counters, and give the host clean numbers to work with. That is rbAmp.

What we believe

Code you can read.

Our integration libraries (ESPHome, Arduino, ESP-IDF, Python) and our documentation are open source under the MIT licence. The module firmware and hardware designs are not published.

Your data stays with you.

The modules have no cloud and send nothing on their own: they answer when your controller reads them.

Plain about scope.

We say where a feature is BASIC-only or STD-only, and anything not yet on sale is marked as such.

What we do not do

  • rbAmp modules are metering and monitoring modules. They are not certified billing meters, and we do not claim any certification.
  • RBgrid and rbAmp measure; they do not control loads.

Contact

Questions about the products, orders, partnerships: info@rbamp.com

rbAmp is a brand of ZHUHAI ROBOTDYN TECHNOLOGY CO., LTD.